Nov 1, 2025 · A concrete slab is a structural feature, usually of constant thickness, that can be used as a floor or a roof. A slab-on-ground is supported on the subsoil and is usually reinforced with reinforcing …

This guide presents state-of-the-art information relative to the construction of slab-on-ground and suspended-slab floors for industrial, commercial, and institutional buildings. It is applicable to the …

ACI 318 sets out the principles of design for slab shear reinforcement and makes specific reference to stirrups and headed studs. This guide reviews available types and makes recommendations for their …

This guide covers the design of slabs-on-ground for loads from material stored directly on the slab, storage rack loads, and static and dynamic loads associated with equipment and vehicles.

Tilt-up concrete construction is commonly used in low-rise building construction. This guide discusses many of the issues relating to the planning and construction of these buildings to produce a quality tilt …

media, without the written consent of ACI. The technical committees responsible for ACI committee reports and standards strive to avoid ambiguities,

The use of higher-grade reinforcement raised concerns about serviceability (cracking and deflections), which were addressed through a series of changes for slab and beam minimum reinforcement, …

Concrete Breakout Failure Cone Is breakout failure relevant for large-scale connections involving groups of anchors or reinforcing bars?

Conventional saw cuts should generally be made to one-fourth the depth of the slab (ACI 327R-14), although early-entry saws can cut to a lesser depth and still be effective (ACI 224.4R-13). In terms of …

The resulting shear capacity will be less than calculated in ACI 318-14, especially if the design section has a low ρ as is likely in double-tee flanges, other precast slab elements, or cast-in-place slabs.